null

WF32: WiFi Enabled PIC32 Microcontroller Board with Uno R3 Headers

Was: $69.99
Now: $35.99
(2 reviews) Write a Review
SKU:
410-273

The WF32 is no longer in production. Once the current stock is depleted, it will be discontinued.

The WF32 is a prototyping platform that adds the performance of the Microchip® PIC32 microcontroller. The WF32 is the first board from Digilent to have a WiFi MRF24 and SD card on the board both with dedicated signals. The WF32 board takes advantage of the powerful PIC32MX695F512L microcontroller, which features a 32-bit MIPS processor core running at 80 MHz, 512K of flash program memory, and 128K of SRAM data memory. The WF32 can be programmed using the Multi-Platform Integrated Development Environment (MPIDE). It contains everything needed to start developing embedded applications. The WF32 features a USB serial port interface for connection to the MPIDE and can be powered via USB or by an external power supply. In addition, the WF32 is fully compatible with the advanced Microchip MPLAB® IDE and works with all MPLAB compatible in-system programmer/debuggers, such as the Microchip PICkit™3 or the chipKIT PGM. The WF32 is easy to use and suitable for both beginners and advanced users experimenting with electronics and embedded control systems.

Processor/IC: Microchip PIC32MX695F512L

Connector(s):

  • USB A to mini-B connector
  • microSD connector
  • External power connector
  • USB connector for USB serial converter 
  • PIC32MX6xx
  • 512KB Flash
  • 128KB RAM
  • 80 MHz operating speed
  • Four SPI and five I2C connectors
  • 16 channel 10-bit ADC, five compare/PWM outputs
  • 43 available I/O pins
  • 3.3V operating voltage
  • High efficiency, switching 3.3V power supply providing low-power operation
  • 12 analog inputs
  • Connects to a PC using a USB A to mini-B cable (not included)
  • USB 2.0 OTG controller with A and micro-AB connectors
  • MicroSD card connector
  • Four user LEDs, two user pushbuttons, one potentiometer
  • Programmable with MPIDE
  • Also programmable with MPLAB IDE (with the addition of the PICkit 3 in-system programmer/debugger)
  • Microchip MRF24WG0MA WiFi module
  • WF32
  • Custom Digilent cardboard box with protective foam

Programming: MPIDE, MPLAB IDE, MPLAB compatible in-system programmer/debuggers

Quickly find what you need to get started and reduce mean time to blink.

All product support including documentation, projects, and the Digilent Forum can be accessed through the product resource center.

Resource Center

Quick Links

Reference Manual
Schematic

2 Reviews Hide Reviews Show Reviews

  • 5
    Only Wi-Fi board that works easily with LabVIEW

    Posted by Digilent Customer on 9th Mar 2018

    I have purchased 3 of these boards for various projects where I needed a sensor to be wireless but the code would be too complicated to type up in Arduino. Using LabVIEW and the LINX add on, this board has been a life saver!

  • 1
    Looks Pretty

    Posted by Digilent Customer on 19th Jan 2018

    No instructions as to how it might run on a school network, or anything other than a home network. Thus it is useless for me and has made me look stupid as I thought it would be a simple solution for working with LabVIEW. Instead just a shit-stain on my rep.