Project Starter Kit: Breadboardable Component Designed for MCU projects

MSRP: $119.00
Was: $119.00
Now: $101.15
(You save $17.85 )
(1 review) Write a Review
SKU:
240-064
Product image of the Project Starter Kit displaying the included components. Digilent retains the right to change a part or product to a similar item to meet lead time, cost, and MOQ requirements.

The Project Starter Kit is no longer in production. Once the current stock is depleted, it will be discontinued.

The Project Starter Kit provides a wide range of sensors, motors, and electronic components selected to enable an endless array of projects. The kit's parts have been selected to facilitate the creation of fun, useful, and entertaining projects, while at the same time facilitating the exploration of multiple disciplines, from optics to mechanics, from electrical engineering. Projects can range from as simple as blinking LEDs, to performing tracking based on optical information when paired with a development board, to much more!

The kit includes a wide range of Integrated Circuits, Motors, Switches, Sensors, Displays, Passive and Active circuit components, and a breadboard. A complete list of parts is located in the What's Included tab. 

 
Qty. Description:
Integrated Circuits:
2 IC TCA0372, Op Amp, dual, 1A, DIP8
1 IC NE555P, Timer, DIP8
1 IC MCP4902-E/P
1 IC Darlington pair array, HV, DIP18
1 IC L293DNE, motor driver, Quad half-bridge, DIP16
1 IC MCP9700-E/TO, thermal sensor, 2.3V, TO-92
1 IC MCP6546-E/P
1 IC SN74HC4851N, MUX/DEMUX, 8x1, DIP16
1 IC 74HC7014N,112; buffer, hex schmitt trigger, DIP14
3 IC SN74HC595N, 8 bit shift register, DIP16
1 IC MCP23008-E/P
1 IC SN74HC139N, decoder/DEMUX, DL 2-4L, DIP16
1 IC UA78L05ACLPR, 5V regulator, 100ma, TO-92

Active Components:
4 Transistor ZVN2110A, N-FET
4 Transistor ZVP2110A, P-FET
4 Diode 1N4001, rectifier, 50PIV, 1A DO-41

Sensors:
1 Thermistor 10K ohm, %5 NTC 450mW, radial
1 Sensor Piezo sensor, 1.4 V/g, SPST, solder lug
2 Sensor 5K-20K ohm photocell, 4.20mm
1 Photo Transistor QSC114, IR Photo Trans, T1, 880nm

Opto-Electronics:
1 Display LED, 7-segment, 4 digit, CA, 0.56, hi-bright
1 Display LCM-S01602DSF (SC1602ZS*B-XA-GS-G01), 16x2 character, no backlight
1 LED Straw hat Tricolor LED
12 LED Orange/yellow, T 1-3/4
12 LED Green, T 1-3/4
12 LED Red, T 1-3/4, with flange
1 LED QED123, IR Emitter, T 1-3/4, 880nm
Qty. Description:
Electro-Mechanical:
1 Speaker Buzzer, 3.1KHz, 4-6V, Ext Drv, PCB Mount
1 Mechanical 1/102 DC motor
1 Mechanical TPRO Servo SG92R
1 Mechanical Stepper motor, 5V
4 Switch TSA12111, 12mm SPST button
4 Switch SPST, momentary push button, PC mount
4 Switch SPDT, slide, PC mount
4 Potentiometer 10K ohm w/thumbwheel
1 Relay JZC-11F-5VDC-1Z Relay

Passive Components:
1 Inductor TK4460-ND, FIXED 1000UH TYPE 8RHB
10 Capacitor 0.01uF, ceramic disc, radial
10 Capacitor 0.1uF, ceramic disc, radial
5 Capacitor 10uF, electrolytic, 50V, radial
25 Resistor 10K ohm, carbon film, 1/4W, 5%
25 Resistor 220 ohm, resistor, axial, 1/4W, 5%
2 Resistor FSR 402 round force sensing resistor, circ w/tab
3 Resistor 1.0M ohm, carbon film, 1/4W, 5%
3 Resistor 10 Mohm Resistor, axial, 1/4W, 5%

Accessories:
1 Wire Kit 70 piece, 22AWG Round Tips
2 Cable, 22AWG, 1x6 pin Red-Black-Yellow-Blue-Green-Brown
1 Kit 6 Pin Male header, 5 Pack
1 Battery Holder 4xAA Battery Holder, Wire Leads, 2 Pin MTE
1 Solderless Breadboard 1030 Tie-Point
1 Box E-201 Component Box

1 Review Hide Reviews Show Reviews

  • 5
    Great Value

    Posted by Paul Courville on 18th Apr 2019

    I've been playing/working in electronics since 1976. The Digilent Analog Discovery2 and Parts Kit is the best value I have found. Make no mistake, this is not "professional grade", but an excellent way to re-enforce textbook theory. You will however, be able to build and test some basic electronic circuits. With an inexpensive microcomputer you will be able to even more... enjoy!