![Size comparison product image of the Pmod OC1: Open Collector Output and a US quarter (diameter of quarter: 0.955 inches [24.26 mm]; width: 0.069 inches [1.75 mm]).](https://cdn11.bigcommerce.com/s-7gavg/images/stencil/1280x1280/products/197/3214/Pmod_OC1_use_600__38507.1533763912.png?c=2 "Size comparison product image of the Pmod OC1: Open Collector Output and a US quarter (diameter of quarter: 0.955 inches [24.26 mm]; width: 0.069 inches [1.75 mm]).")
The Pmod OC1 is an open collector BJT module using MMBT3904 transistors. Users can then drive high current devices (up to 200 mA) by providing logic signals from the host board.
- Four 100mA (200mA max) MMBT3904 transistors
- Four output clamp diodes
- 40V voltage threshold
- Small PCB size for flexible designs 1.0“ × 0.8” (2.54 cm × 2.0 cm)
- 6-pin Pmod connector with GPIO interface
- Follows Digilent Pmod Interface Specification Type 1
- Pmod OC1
- Custom antistatic Pmod packaging
Quickly find what you need to get started and reduce mean time to blink.
All product support including documentation, projects, and the Digilent Forum can be accessed through the product resource center.
Resource Center
