Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...

Electronics Explorer: All-in-one USB Oscilloscope, Multimeter & Workstation


Electronics Explorer: All-in-one USB Oscilloscope, Multimeter & Workstation


Product Description


The Digilent Electronics Explorer board (EE board) includes all of the test and measurement equipment needed to design, build, and test analog and digital circuits of all types. Built around a large solderless breadboard, the EE board includes a 4-channel mixed-signal USB oscilloscope, waveform generator, variable power supply, voltmeter, reference voltage generator, and thirty-two digital signals that can be configured as a logic analyzer, pattern generator, or any one of several static digital I/O devices. All of these instruments can be connected to circuits built on the solderless breadboards using simple jumper wires. 

Designed for daily use and intended for every student to own, the EE board combines everything needed to design and test circuits in a single all-in-one device. Even in introductory classes, students can build, test, and analyze real circuit designs as a part of every homework assignment. No more once a week labs; now every student can complete designs in virtually any setting - any residence can be a complete, 24-hour design studio!

Support Materials

Datasheet (PDF) Schematics (PDF)

For all other material:

Resource Center

The EE board is powered by the free, WaveForms software (now Windows, Mac, and Linux compatible) that makes it easy to acquire, store, analyze, produce, and reuse analog and digital signals. WaveForms runs well on virtually any notebook PC, including low-cost Netbooks. A high-speed USB2 connection ensures all EE board instruments respond in near real-time. 

WaveForms data files are stored using standard formats, making it easy to share data between instruments, and to export data to word processors or graphics editors. This means well documented student labs/project reports can be completed using standard office tools, and submitted electronically. 


  • 4-channel, 40MSa Oscilloscopes
  • 2-channel Arbitrary Waveform Generator
  • Power supplies
  • 4-channel voltmeter
  • 2 programmable reference voltages
  • Triple-output power supply (two programmable)
  • Can connect all instruments to circuits built on the solderless breadboard using simple jumper wires
  • 32 digital signals that can be configured as:
    • 32-channel logic analyzer
    • 32-channel pattern generator
    • Discrete digital I/Os (buttons, switches, LEDs, etc.)

The EE board ships with a power supply, a USB cable, and the Starter Parts Kit. This kit contains an assortment of analog parts so you can start building and testing circuits right out of the box. 

The Kit Includes:

  • 2 Resistor 1.1Ω 1/4W
  • 3 Resistor 10Ω 1/4W
  • 2 Resistor 47Ω 1/4W
  • 1 Resistor 50Ω 1W
  • 5 Resistor 100Ω 1/4W
  • 3 Resistor 470Ω 1/4W
  • 5 Resistor 1kΩ 1/4W
  • 2 Resistor 1.5kΩ 1/4W
  • 5 Resistor 2.2kΩ 1/4W
  • 2 Resistor 4.7kΩ 1/4W
  • 2 Resistor 6.8kΩ 1/4W
  • 5 Resistor 10kΩ 1/4W
  • 2 Resistor 20kΩ 1/4W
  • 5 Resistor 47kΩ 1/4W
  • 3 Resistor 100kΩ 1/4W
  • 2 Resistor 10MΩ 1/4W
  • 1 Potentiometer 5kΩ
  • 1 Potentiometer 10kΩ
  • 1 Capacitor 0.001μF
  • 1 Capacitor 0.0047μF
  • 1 Capacitor 0.01μF
  • 1 Capacitor 0.1μF
  • 1 Capacitor 1μF
  • 1 Capacitor 10μF
  • 1 Capacitor 22μF
  • 1 Inductor 1mH
  • 4 Diode 1N4001
  • 1 LED Red T1-3/4
  • 1 Transistor NPN 2N3904
  • 1 Transistor PNP 2N3906
  • 1 MOSFET ZVN2110
  • 1 MOSFET ZVP2110
  • 1 Thermistor 10kΩ
  • 1 Photocell 5k-10kΩ
  • 1 Buzzer 3.1kHz, 4-6V
  • 1 IC-OpAmp LM833P
  • 1 IC-Comparator TLV27021P
  • 140 Pre-trimmed jumper wires

Note: Some of these parts may occasionally be substituted for equivalents, due to changing availability. 


  • Power supply
  • USB cable
  • Starter parts kit

Product Videos

Product Reviews