Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Digilent

Cmod S7: Breadboardable Spartan-7 FPGA Module

$69.00

Cmod S7: Breadboardable Spartan-7 FPGA Module

$69.00
SKU:
410-376
Current Stock:
658
Share

Product Description

The Digilent Cmod S7 is a small, 48-pin DIP form factor board populated with 36 pins and built around a Xilinx Spartan-7 FPGA. The 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well-suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons.

Support Materials

DatasheetSchematics (PDF)

For all other material:

Resource Center

Features:

  • Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)
    • 3,650 slices containing four 6-input LUTs and 8 flip-flops
    • 1,620 Kbits of fast block RAM
    • Three clock management tile, each with a phase-locked loop and mixed-mode clock manager
    • 80 DSP slices
    • Internal clock speeds exceeding 450 MHz
    • On-chip analog-to-digital converter (XADC)
    • Programmable over JTAG and Quad-SPI Flash
  • Memory
    • 4 MB Quad-SPI Flash
  • Power
    • Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included)
  • USB
    • USB-JTAG programming circuitry
    • USB-UART bridge
  • Push-buttons and LEDs
    • 2 Buttons
    • 4 LEDs
    • 1 RGB LED
  • Expansion Connectors
    • 1 Pmod connector
      • 8 total FPGA I/O
    • 48-pin DIP form-factor headers
      • 36 populated pins
        • 32 total FPGA I/O
        • 2 Single-ended 0-3.3V analog inputs to XADC

What's
Included:

  • Cmod S7
  • Digilent cardboard packaging with protective foam inserts

Product Reviews