The Cmod MX1 is no longer in production. Once the current stock is depleted, it will be discontinued.
The Cmod MX1 is a MPIDE compatible board from Digilent. It combines a Microchip® PIC32MX150F128D microcontroller with a convenient 600-mil, 40-pin DIP package and two Digilent Pmod ports. Digilent's Cmod boards are ideally suited for breadboards or other prototype circuit designs where the use of small surface mount packages is impractical.
The Cmod MX1 takes advantage of the powerful PIC32MX150F128D microcontroller. This microcontroller features a 32-bit MIPS processor core running at 40 MHz, 128K of flash memory, and 32K of SRAM data memory.
The Cmod MX1 can be programmed using the Multi-Platform Integrated Development Environment (MPIDE). The board provides everything needed to start developing embedded applications using the MPIDE. The Cmod MX1 is also fully compatible with the advanced Microchip MPLAB® IDE. To develop embedded applications using MPLAB, a separate device programmer/debugger, such as the chipKIT PGM or the Microchip PICkit™3 is required.
Processor/IC: Microchip PIC32MX150F128D microcontroller
Connector(s): PC connection uses a USB A to micro-B cable (not included)
- 128KB Flash
- 32KB RAM
- 50 MHz operating speed
- PPS, two SPI, two I2C, and two UART connectors
- 13 channel 10-bit ADC
- 33 available I/O pins
- 3.3V operating voltage
- 13 analog inputs
- Two 12-pin Pmod ports
- Convenient 600-mil 2x20-pin DIP package
- Two user LEDs
- Programmable with MPIDE
- Also programmable with MPLAB IDE (with the addition of the PICkit 3 in-system programmer/debugger)
- Cmod MX1
- Custom Digilent cardboard box with protective foam
Programming: MPIDE and MPLAB IDE (with the use of a separate programmer/debugger)