Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Digilent

chipKIT Network Shield: Ethernet for Mega R3 Platforms

$54.99

chipKIT Network Shield: Ethernet for Mega R3 Platforms

$54.99
SKU:
410-211
Share

Product Description

The chipKIT™ Network Shield is an input/output expansion board designed for use with the chipKIT Max32. It provides the additional circuitry and connectors to allow the advanced communications features of the PIC32MX795F512L on the Max32 to be utilized. 

The Network Shield provides a 10/100 Mbps Ethernet PHY to allow connection to an Ethernet network. It provides the connectors and load switch to support use of the USB 2.0 OTG controller to implement USB device, USB host or OTG operation. It also provides two CAN transceivers and connectors to allow connection to two independent CAN networks. Connectors are provided to allow connection to two of the I2C busses supported by the Max32. 

In addition to the communications features, the Network Shield also adds a 256Kbit I2C EEPROM for non-volatile data storage and a 32.768Khz oscillator to allow use of the Real Time Clock/Calendar (RTCC) peripheral in the PIC32 microcontroller. 

The Network Shield is designed to the same form factor as the Max32 board.

Support Materials

Datasheet (PDF) Schematics (PDF)

For all other material:

Resource Center

Stats:

Processor/IC: SMSC LAN8720

Connector(s): 

  • RJ45 connector w/ integral magnetics
  • USB device & host

Features:

  • Usable with the Max32
  • SMSC LAN8720 10/100 Ethernet PHY
  • RJ45 connector with integral magnetics
  • USB device and host connectors
  • Two MCP2551 CAN transceivers
  • Two 12-pin header connectors for CAN
  • Two I2C daisy chain connectors
  • 256Kbit I2C EEPROM
  • 32.768 KHz oscillator

 

What's
Included:

  • chipKIT Network Shield
  • Custom Digilent cardboard box with protective foam

Product Videos

Product Reviews