Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Digilent

Introduction to Digital Design Using Digilent FPGA Boards

$34.95

Introduction to Digital Design Using Digilent FPGA Boards

$34.95
Share

Product Description

By Richard E. Haskell & Darrin M. Hanna
 
LBE Books, 2009 
 
ISBN: 978-0980133769
 
Paperback

This book uses 30 examples to show you how to get started designing digital circuits in VHDL or Verilog® and using block diagrams, simulate them, and quickly and easily download them to your Basys or Nexys 2 board. Get up and running quickly– step-by-step, by example! 

A major revolution in digital design has taken place over the past decade. Field programmable gate arrays (FPGAs) can now contain over a million equivalent logic gates and tens of thousands of flip-flops. This means that it is not possible to use traditional methods of logic design involving the drawing of logic diagrams when the digital circuit may contain thousands of gates. The reality is that today digital systems are designed by writing software in the form of hardware description languages (HDLs). The most common HDLs used today are VHDL and Verilog. Both are in widespread use. When using these hardware description languages the designer typically describes the behavior of the logic circuit rather than writing traditional Boolean logic equations. Computer-aided design tools are used to both simulate the VHDL or Verilog design and to synthesize the design to actual hardware. 

This book assumes no previous knowledge of digital design. We will use Active-HDL from Aldec to design, simulate, synthesize, and implement our digital designs. A free student edition of Active-HDL simulator is available from Aldec Inc (www.aldec.com). o synthesize your design to a Spartan-3E FPGA, you will need to download the Free ISE WebPACK™ from Xilinx® Inc. (www.xilinx.com). The Xilinx synthesis tools are called from within the Aldec Active-HDL integrated GUI. We will use the ExPort utility to download your synthesized design to the Spartan3E FPGA. ExPort is part of the Adept software suite that you can download free from Digilent, Inc.

Get started now! Download the first 15 examples and software tutorial from this book for free!

Note:

Software and Hardware Versions

To program a Basys 2 or Nexys 2 board, you must use a "front-end" design tool to create a source file that defines the intended circuit, and "back-end" tools to synthesize the source file and download it to the board. Xilinx's free WebPACK software contains all needed tools, including source file editors, a synthesizer, and downloader. Aldec also produces a free front-end tool that can be used to create source files. Called Active-HDL, this front-end design tool presents a more student-friendly design interface, and it can automatically route design files to Xilinx's back-end tools. The authors recommend Active-HDL due to its more intuitive interface. 

If you are using a Basys board, you must use the user constraints file (.ucf) file for the Basys board (basys.ucf) available at http://www.lbebooks.com/downloads.htm 

If you are using a Basys 2 board, you must use the user constraints file (.ucf) file for the Basys 2 board (basys2board.ucf) available at http://www.lbebooks.com/downloads.htm and you must download the Adept 2.1 (or above) software from the Adept Software page. 

You cannot use Adept 1.10 with the Basys 2 board.

Product Reviews